Configure your iOS device to connect to tu-secure, the wireless network that provides the most secure and stable connection and access to your H: drive and other secured resources.
Connect your iOS device to tu-secure
- Select Settings from the device's Home screen.
- Select Wi-Fi from the Settings screen.
- Verify that Wi-Fi is enabled — the slider is green.
- Select tu-secure under CHOOSE A NETWORK.
- Enter your NetID username and password.
- Select Join. If you receive an error message, select Dismiss and then select Join again.
- Select Trust in the Certificate window to finish joining tu-secure.
Troubleshooting your connection
If you are having trouble connecting to tu-secure, reset your network settings.
- Select Settings from the device's Home screen.
- Select General from the Settings screen.
- Scroll down and select Reset.
- Select Reset Network Settings from the Reset window. This will reset ALL network settings from any Wi-Fi connection on your device.
- Once your device has reset, follow the connection steps above. It may take a few minutes to fully connect to the network after entering your credentials.
Note: The Private Address option should be set to Off or Fixed. You will have problems if it is set to Rotating.
| Still need help? Consider the Related Articles box on this page, or open a ticket. |